Isolation of thermotolerant Bacillus subtilis DCH4 from Chancos hot spring (Carhuaz, Peru) with potential to degrade lignocellulosic agriculture wastes / Aislamiento de Bacillus subtilis DCH4 termotolerante de la fuente termal Chancos (Carhuaz, Perú) con potencial para degradar residuos lignocelulósicos agrícolas

Abstract It was isolated bacteria strains from three different types of samples: fresh water, in situ baits and ex situ enrichment. Serial dilutions were prepared and culture was carried at 50 °C using a Basal-Saline medium. Isolated strains were screened for endoglucanase and xylanase activities with qualitative (Congo Red) and quantitative (DNS) methods. Molecular 16S rDNA sequencing analysis was performed for taxonomic identification. It was isolated 31 strains of which 14 showed hydrolytic activities and belonged to Bacillus subtilis and Bacillus licheniformis species. Moreover, the strain B. subtilis DCH4 showed the highest endoglucanase activity at 45°C and pH 5, and xylanase activity at 55°C and pH 6. Then, DCH4 was cultivated by submerged fermentation with two different media supplemented with sugar cane bagasse, wheat straw, or quinoa stalk to evaluate its saccharification capability. Likewise, it was screening its xylanase and cellulase genes employing specific primers; the amplicons obtained were sequenced, and analyzed. It was found that, enzymatic extracts of DCH4 prepared with cane bagasse or quinoa stalk media achieved the highest endoglucanase and xylanase activities. According to molecular analysis of genes involved in the hydrolytic process, the endoglucanase and xylanase activities exhibited by DCH4 could be attributed to a bifunctional cellulase conformed by endo-beta-1,4-glucanase (GH5) joined to cellulose binding domain 3 (CBM3), and an endo-1,4-beta-xylanase (GH11), respectively. Further transcriptomic experiments would be considered to accomplish optimization strategies for biofuel production from lignocellulosic biomass.

Resumen Se aislaron cepas de bacterias provenientes de tres tipos de muestras: agua fresca, cebos enriquecidos in situ y ex situ. Se prepararon diluciones seriadas y el cultivo fue a 50 °C usando un medio Salino-Basal. Las cepas aisladas fueron tamizadas para las actividades endoglucanasa y xilanasa con métodos cualitativos (Rojo Congo) y cuantitativos (DNS). Se usó el análisis molecular 16S rDNA para la identificación taxonómica. Se aislaron 31 cepas, de las cuales 14 mostraron actividades hidrolíticas y pertenecían a Bacillus subtilis y Bacillus licheniformis. Además, B. subtilis DCH4 mostró la mayor actividad endoglucanasa a 45 °C y pH 5, y xilanasa a 55 °C y pH 6. Entonces, DCH4 se cultivó por fermentación sumergida con dos medios diferentes suplementado con bagazo de caña de azúcar, paja de trigo o tallo de quinua para evaluar su capacidad de sacarificación. También, se exploraron los genes de xilanasa y celulasa mediante cebadores específicos; los amplicones obtenidos fueron secuenciados y analizados. Se encontró que los extractos enzimáticos de DCH4 preparados con bagazo de caña o tallos de quinua mostraron las actividades endoglucanasa y xilanasa más elevadas. De acuerdo a los análisis moleculares de los genes involucrados en el proceso hidrolítico, las actividades de endoglunacasa y xilanasa exhibidas por DCH4 podrían atribuirse a una celulasa bifuncional conformada por una endo-beta-1,4-glucanasa (GH5) unida al dominio celulosa 3 (CBM3), y una endo-1,4-beta-xilanasa (GH11), respectivamente. Posteriores experimentos transcriptómicos podrían ser considerados para lograr estrategias de optimización para la producción de biocombustibles a partir de biomasa lignocelulósica.

A simple and accurate method for specific quantification of biomass in mixed cultures of filamentous fungi by quantitative PCR / Un método simple y preciso para la cuantificación específica de biomasa en cultivos mixtos de hongos filamentosos por PCR cuantitativa

Abstract Production of lignocellulolytic enzymes by filamentous fungi have a great potential at industrial level due to their widespread applications. Mixed fungal cultures and particularly mixed fungal biofilms constitute a promising fermentation system for an enhanced enzyme production. However, it has not been addressed how much of this enhancement depends on the mixed biomass proportion. In this sense, the aim of this study was to develop a method to specifically and accurately quantify mixed fungal biomass. For this purpose, mixed biofilm cultures composed of Aspergillus niger and Trichoderma reesei, two filamentous fungi used industrially for cellulase production, were collected from 48 to 120 h of growth; mycelia were pulverized, and DNA was extracted for qPCR assays with specific primers for each fungus. Primers were designed from non-conserved regions of sequences of actin and β-tubulin genes of both A. niger and T. reesei. Specificity of these primers was tested in silico and experimentally. A statistically significant correlation was obtained between qPCR-calculated biomass and dry weight biomass data. By this method, it was possible to detect changes on mycelia proportions in biofilms over time, suggesting a competitive interaction between these two fungi. In conclusion, this method allows a specific and accurate quantification of mixed fungal biomass and could be also applied to different mixed culture systems for studying microbial interactions.

Resumen La producción de enzimas lignocelulolíticas por hongos filamentosos tiene un gran potencial a nivel industrial debido a sus diversas aplicaciones. Los cultivos fúngicos mixtos y particularmente las biopelículas fúngicas mixtas constituyen un sistema de fermentación prometedor para una mayor producción enzimática. Sin embargo, no se ha abordado cuánto de esta mejora depende de la proporción de biomasa mixta. En este sentido, el objetivo de este estudio fue desarrollar un método para cuantificar de forma específica y precisa la biomasa fúngica mixta. Para este propósito, se recolectaron cultivos mixtos de biopelículas de 48 a 120 h de crecimiento compuestos por Aspergillus niger y Trichoderma reesei, dos hongos filamentosos utilizados industrialmente para la producción de celulasas; el micelio se pulverizó y el ADN se extrajo para ensayos de qPCR con cebadores específicos para cada hongo. Los cebadores se diseñaron a partir de regiones no conservadas de las secuencias de los genes de actina y β-tubulina de A. niger y T. reesei. La especificidad de estos cebadores se probó in silico y experimentalmente. Se obtuvo una correlación estadísticamente significativa entre la biomasa calculada mediante qPCR y los datos de biomasa en peso seco. Mediante este método, fue posible detectar cambios en las proporciones de los micelios en las biopelículas a lo largo del tiempo, lo que sugiere una interacción competitiva entre estos dos hongos. En conclusión, este método permite una cuantificación específica y precisa de la biomasa fúngica mixta y también podría aplicarse a diferentes sistemas de cultivo mixto para estudiar interacciones microbianas.

Alkaline Cellulase Production by Penicillium mallochii LMB-HP37 Isolated from Soils of a Peruvian Rainforest.

Alkaline cellulases are demanded by the textile industry for several purposes but commercial preparations showing activity at alkaline conditions are very scarce. Aim: To characterize a Penicillium strain isolated form soils of a Peruvian rainforest showing alkaline cellulase activity that may be useful for the textile industry. Methodology: The molecular identification was based on the DNA sequence of its ITS region using ITS1 and ITS4 primers after PCR amplification. Cellulase production was evaluated in shaken flasks by using either lactose or microcrystalline cellulose. Total cellulase (as FPA) and endoglucanase activities were evaluated by the standard methods at several pH levels. Also, the cellulase activity of culture filtrates was tested for antipilling activity as compared to a commercial neutral cellulase preparation. Results: After raw data of ITS DNA sequence was processed, multiple alignment and phylogenetic analysis confirmed that our strain can be named as Penicillium mallochii LMB-HP37. Higher activity was attained for neutral total cellulase on lactose (3371±108 U/l at pH 7.4) and alkaline cellulases attained similar activity levels than the acid cellulase (2978±151 U/l at pH 8.4 and 2910±42 U/l at pH 9.4). FPA and endoglucanase activities were produced at high volumetric (46.8±1.5 and 13.5±1.0 U/l.h, respectively) and specific (32.9±1.1 and 9.5±0.7 U/gbiomass.h, respectively) productivities at the same pHs which indicate that this strain may be suitable for commercial development. The enzyme of P. mallochii LMB-HP37 had slightly better results than the commercial enzyme as an anti-pilling agent even though is a crude preparation. Conclusion: Penicillium mallochii LMB-HP37 produced high total cellulase activity on lactose which compares to well-known cellulase producers but at neutral to alkaline pH levels. Data obtained reveal that the crude enzyme is suitable for anti-pilling process (biopolishing) and may be also useful for biostoning.

Efecto de diámetro de esfera y densidad celular en la producción de etanol con levadura inmovilizada en alginato / Effect of pellet diameter and cell density on ethanol production with alginate immobilized yeast

Las células inmovilizadas tienen aplicación potencial en la producción de biocombustibles posibilitando la reutilización de biomasa, el empleo de diversas configuraciones de reactores y sistemas de cultivo, el manejo de altas densidades celulares alcanzando altas productividades volumétricas, y la simplificación de operaciones de procesamiento de salida. El objetivo del presente estudio fue evaluar la influencia del diámetro de las perlas y la densidad celular en la producción de etanol con Saccharomyces uvarum inmovilizada en alginato al 2% (p/v). Para ello se evaluaron tres diámetros de perlas de 2, 2,5 y 3 mm. Las células inmovilizadas fueron cultivadas en medio con 12% (p/v) de glucosa en biorreactores de columna sin agitación a 28 ºC, y se operaron cuatro lotes consecutivos de 48 horas cada uno. En cada lote se cuantificó el consumo de glucosa y se determinó la cantidad de etanol producido. Los rendimientos máximos de etanol para las esferas de 2, 2,5 y 3 mm de diámetro fueron 81, 83 y 97% del rendimiento teórico. La máxima productividad volumétrica de etanol fue 1,2 g/L-1/h-1 con un consumo de glucosa de 99,8% al término del lote, correspondiente a las columnas con perlas de 3 mm y con una producción de 0,017 g de etanol por esfera. La producción de etanol acumulada en cada sistema fue 178, 189 y 200 g/L-1 para 2, 2,5 y 3 mm respectivamente, encontrándose una relación directa con el diámetro de perla e inversa respecto a la densidad celular. Los rendimientos de etanol obtenidos son superiores a los reportados para la misma especie.

Immobilized cells have a potential use in biofuel production. They also allow re-using biomass, using diverse reactor configurations and culture systems, handling high cell densities to obtain high volumetric productivities and to simplify the downstream processing. The purpose of this work was to evaluate the influence of bead diameter and cell density on ethanol production using immobilized Saccharomyces uvarum in 2% (w/v) alginate. For that, three bead diameters (2, 2.5 and 3 mm) were evaluated. Immobilized cells were cultured on a 12% (w/v) glucose medium in column bioreactors without agitation at 28 °C for four 48 h–repeated batches. For each batch, both glucose consumption and ethanol produced were measured. Maximum yields for 2, 2.5 and 3 mm bead diameters were 81, 83 and 97% of theoretical yield. Maximum volumetric productivity of ethanol was 1.2 g/L-1/h-1 with 99.8% glucose consumption at the end of the batch, corresponding to the 3 mm bead diameter and the ethanol production per bead was 0.017 g. Accumulated ethanol production for each system was 178, 189 and 200 g/L-1 for 2, 2.5 y 3 mm bead diameter, respectively, being this directly related to bead diameter and inversely related to cell density. Ethanol yields were higher than those reported for the same species.

Influencia de la concentración de inóculo en la producción de celulasa y xilanasa por aspergillus niger / Influence of inoculum concentration on the cellulase and xylanase production by aspergillus niger

Existe un gran interés por el uso de enzimas lignocelulolíticas en varias industrias, y en la biodegradación de biomasa para la producción de biocombustibles y otras aplicaciones. Entre las fuentes microbianas de enzimas, Aspergillus niger es uno de los microorganismos más utilizados en la producción de enzimas industriales, debido a sus niveles altos de secreción de proteína y a su condición GRAS (generally regarded as safe). El objetivo del presente estudio fue evaluar la influencia de la concentración de inóculo en la morfología y producción de celulasas y xilanasas con A. niger en cultivo sumergido. Para ello, fueron inoculados matraces de 250 mL con 40 mL de medio con 3% (v/v) de una suspensión de 104 o 108 esporas por mililitro e incubados a 28 ºC y 175 rpm durante 120 horas. Se utilizaron 10 g*L-1 de lactosa como fuente de carbono. En cada caso se determinó la cantidad de biomasa, la proteína extracelular soluble, lactosa residual, actividad celulasa total y xilanasa cada 24 horas. Aunque no hubo un efecto notorio en la morfología de crecimiento, salvo en el color y el diámetro de pellets obtenidos, sí se afectó la µmax (0,06 y 0,03 h-1 para 104 y 108 esporas*mL-1, respectivamente) y la concentración máxima de biomasa. Además, mientras que las productividades volumétricas de celulasa (ΓFPA) (8,2 y 8,0 UI.*L-1*h-1 para 104 y 108 esporas*mL-1, respectivamente) fueron similares para ambos inóculos, la productividad de xilanasa (ΓXIL) fue mayor para el inóculo más concentrado (29,7 y 33,4 UI¨*L-1*h-1 para 104 y 108 esporas*mL-1, respectivamente). Los resultados indican que la productividad de celulasas y xilanasas está estrechamente relacionada con la concentración de inóculo.

There is a great interest for the use of lignocellulolytic enzymes in several industries and in biomass degradation for production of biofuels and other applications. Among the microbial sources of enzymes, Aspergillus niger is one of the most used microorganisms in the production of industrial enzymes due to its high levels of protein secretion and its GRAS (generally regarded as safe) condition. The aim of the present study was to evaluate the influence of A. niger inoculum concentration in the morphology and production of cellulases and xylanases in submerged cultures. For this, 250 mL flasks containing 40 mL culture medium were inoculated with a 3% (v/v) of either 104 or 108 spores per milliliter suspension and incubated at 28 º C and 175 rpm during 120 hours. Lactose (10 g*L-1) was used as the carbon source. In each case, the amount of biomass, the extracellular soluble protein, residual lactose, total celullase activity and xylanase activity were determined every 24 hours. Even thought there was not a notorious effect on the growth morphology, except in color and diameter of pellets; µmax was affected (0.06 and 0.03 h-1 for 104 and 108 spores*mL-1, respectively) as well as maximum biomass concentration. In addition, while the volumetric productivity of cellulase (8.2 and 8.0 UI*L-1*h-1 for 104 and 108 spores*mL-1, respectively) were similar for both inocula, the productivity of xylanase was greater for the more concentrated inoculum (29.7 and 33.4 UI*L-1*h-1 for 104 and 108 spores*mL-1, respectively).The results show that cellulase and xylanase productivities are closely related to the inoculum concentration.

Production of lignocellulolytic enzymes by Aspergillus niger biofilms at variable water activities

Lignocellulolytic enzyme production by Aspergillus niger was compared both in submerged fermentation (SF) and biofilm fermentation (BF) at varying water activities. Maximal filter paper activity, endoglucanase and xylanase activities were much higher in BF (2.96, 4.7 and 4.61 IU ml-1, respectively) than in SF cultures (1.71, 1.31 and 2.3 IU ml-1, respectively) but biomass yields were lower in BF than in SF (0.338 g g-1 and 0.431 g g-1, respectively). In the presence of 20 percent ethylene glycol (a w = 0.942) the enzyme activities decreased in both systems but BF still had higher levels (1.0, 1.0 and 2.6 IU ml-1, respectively) than SF cultures (0.6, 0.7 and 1.5 IU ml-1, respectively). An increase in xylanase specific activity of more than 2 fold (from 4.2 to 10.2 IU mg-1 biomass) was observed in the presence of 20 percent ethylene glycol, suggesting differential regulatory mechanisms in biofilm fermentation related to cell adhesion.